Synchronous motors of SM series with permanent magnets
The motors are designed in four shaft heights from 112 mm to 400 mm. The motors can be made in open version, degree of protection IP23, or in enclosed version, degree of protection IP54, cooled by air or by liquid. These synchronous motors can be used also in generator operation.
Synchronous torque motors of ROL series with permanent torque from 45 Nm to 9000 Nm
These motors are made with permanent magnets on the rotor, with high torque values at a low speed. They have a high pole number. The motors are delivered commonly with water cooling.
Synchronous lift motors of SVM 170 series with permanent magnets
Lift motors of SVM 170 series have the rated torque from 220 Nm to 420 Nm. These motors are intended for direct drives of lifts without a gearbox. They are supplied by means of frequency converters. They can be delivered also as complete units, including rope sheave and axial brakes.
Synchronous lift motors of SVM 250 series with permanent magnets
Lift motors of SVM 250 series have the rated torque from 350 Nm to 1 250 Nm. These motors are intended for direct drives of lifts without a gearbox. They are supplied by means of frequency converters. They can be delivered also as complete units, including rope sheave and axial brakes.
These synchronous motors are intended for the drives of extruders in the speed range from 60 rpm to 1200 rpm and in the torque range from 1 000 Nm to 20 000 Nm.
Synchronous motors of SM series with permanent magnets
The motors are designed in four shaft heights from 112 mm to 400 mm. The motors can be made in open version, degree of protection IP23, or in enclosed version, degree of protection IP54, cooled by air or by liquid. These synchronous motors can be used also in generator operation.
Synchronous torque motors of ROL series with permanent torque from 45 Nm to 9000 Nm
These motors are made with permanent magnets on the rotor, with high torque values at a low speed. They have a high pole number. The motors are delivered commonly with water cooling.
Synchronous lift motors of SVM 170 series with permanent magnets
Lift motors of SVM 170 series have the rated torque from 220 Nm to 420 Nm. These motors are intended for direct drives of lifts without a gearbox. They are supplied by means of frequency converters. They can be delivered also as complete units, including rope sheave and axial brakes.
Synchronous lift motors of SVM 250 series with permanent magnets
Lift motors of SVM 250 series have the rated torque from 350 Nm to 1 250 Nm. These motors are intended for direct drives of lifts without a gearbox. They are supplied by means of frequency converters. They can be delivered also as complete units, including rope sheave and axial brakes.
Big synchronous motors for extruder drives
These synchronous motors are intended for the drives of extruders in the speed range from 60 rpm to 1200 rpm and in the torque range from 1 000 Nm to 20 000 Nm.
CZ | 
EN | 
DE
